- Home
- Masking Materials
- Silicone
Silicone Rubber Fiberglass Heat Tape
Astro Alloys offers silicone rubber fiberglass heat tapes, which offer aggressive adhesion, remove cleanly, and are highly conformable. Browse silicone grit blasting tapes below.
Green Belting Fiberglass Plasma Spray Tapes
Green Belting Fiberglass Plasma Spray Tapes
Green Belting Industries offers a line of fiberglass/plasma spray tapes. These tapes are available in 170-10S YL, 170-10S Red, 170-10S Green, 170-10S CL, 170-20S YL, 170-20S Green, 170-20S Red, this family of plasma spray masking tapes resists the high temperatures of the plasma spray coating process. All plasma spray tapes are constructed with silicone rubber-coated fiberglass tape with a silicone polymer adhesive.
Features:
- Superior mechanical and thermal protection
- Excellent resistance to cut through and abrasion
- Silicone adhesive system for superior adhesion to metal and "face to back"- Releases cleanly from metal surfaces
- The 170-10S Red Plasma Tape allows for improved heat resistance, lower grit retention on the surface, and lowers finger tack while still offering high adhesion to metal and face-to-back adhesion
- The 170-10S CL Plasma Tape has a flat clear liner for high "Quickstick" and easier removal of liner- The 170-20S saves time while taping when two plies are needed
Best Suited For:
- Grit Blasting
- Twin Wire Arc Spray
- Flame Spray
- Plasma Spray Coatings
Specifications
|
Code # |
Width (Inches) |
Nominal Thickness (mil) |
Color |
Tensile (1b/inch) |
|
170-10S Green |
48 |
10-11 |
Green |
205 |
|
170-10S |
48 |
10-11 |
Cream |
125 |
|
170-10S CL |
48 |
10-11 |
Cream |
125 |
|
170-10S Red |
48 |
10-11 |
Red |
125 |
|
170-20S |
48 |
20-22 |
Cream |
200 |
|
Code # |
Adhesion to SS (oz./in. of width) |
Adhesion to itself (oz./in. of width) |
Operating Temp. Range (°F) |
|
170-10S Green |
40 |
30 |
-100 to +500 |
|
170-10S |
40 |
30 |
-100 to +500 |
|
170-10S CL |
40 |
30 |
-100 to +500 |
|
170-10S Red |
40 |
30 |
-100 to +500 |
|
170-20S |
40 |
25 |
-100 to +500 |
DeWAL DW 500
- AGGRESSIVE ADHESIVE
- HIGHLY CONFORMABLE
- CLEANLY REMOVABLE
- HIGH-TEMPERATURE MASKING
- TOTAL THICKNESS .013”, BACKING THICKNESS .009”, ADHESION 50 OZ./IN.
About DW 500
DW 500 is a one-step high-temperature masking tape constructed of a silicone rubber/glass cloth backing coated with an aggressive high-temperature silicone adhesive. It will withstand grit blast and plasma spray process yet will remove cleanly.
DW 500 has a higher tack than most other plasma masking tapes which allows it to easily conform to the most complex shapes of the aircraft industry.
Fill out the form at right to discover how DeWAL high-temperature masking tape can make a difference in your most difficult applications.
Application Information
DW 500 is a high-temperature masking tape for use during plasma flame spraying and provides superior high-temperature protection during both grit blasting and plasma metallization operations.
DeWAL DW410
- EXCELLENT PROTECTION FOR GRIT BLASTING
- HIGH-TEMPERATURE MASKING
- BLUE FOR EASY IDENTIFICATION
- TOTAL THICKNESS .011”, BACKING THICKNESS .008”, ADHESION 35 OZ./IN.
About DW 410
DW 410 is a blue silicone rubber-coated glass fabric with a high-temperature silicone adhesive.
The silicone rubber is tough and abrasion-resistant to withstand high temperatures and grit blasting impact.
The silicone adhesive provides excellent adhesion at high temperatures yet will remove cleanly.
Application Information
This is a Plasma Tape for Thermal Spray masking during plasma flame spraying.
DW 410 is a one-step masking tape that can be used in “grit blast” and “plasma spray” all in one masking application.
DW 410 is very good in preventing bridging during metallization processes.
DeWAL DW497
- HIGH-TEMPERATURE MASKING
- HOLDS UP TO GRIT BLASTING
- CLEANLY REMOVABLE
- TOTAL THICKNESS .011”, BACKING THICKNESS .008”, ADHESION 35 OZ./IN.
About DW 497
DW 497 is a white silicone rubber-coated glass fabric with a high-temperature silicone adhesive.
The silicone rubber is tough and abrasion-resistant to withstand high temperatures and grit blasting impact.
The silicone adhesive provides excellent adhesion at high temperatures yet will remove cleanly.
Application Information
This tape is used as a masking tape in plasma flame spraying.
DW 497 is a one-step masking tape used both in the “grit blast” and “plasma spray” process all in one masking application. It is very good in preventing bridging during the metallization process.
