MODEL 7530 AIR COOLED WATER CHILLER

TAFA Incorporated's 7529 Air Cooled Water Chiller is a recommended auxiliary for closedloop cooling of thermal spray equipment in high ambient air temperature regions. TAFA's JP-5000 and JP-8000 are examples of the TAFA equipment it can be used with. The Model 7529 is a complete comprehensive package that is easy to install. Simply connect the two water lines and electrical power and fill the tank.

HIGH RELIABILITY

• Superior quality refrigeration and electrical components

• Large reservoir for reduced compressor cycling, better temperature control and energy savings

• Plate heat exchanger external to the water reservoir

• Two energy-efficient scroll compressors

• Stainless steel tank and non ferrous water circuit. Pressure relief Valve. Stainless impellers in pump.

• Capable of handling return water pressure up to 45 psig (3.1 bar)

• Standard weatherproof enclosure for covered external use with optional low ambient controls

HIGH VERSATILITY

• Simple, powerful microprocessor controls with four push-button switches, 3 digit LED’s, F or C selection and compressor 1 and 2 running LED display

• Quick access panels for easy maintenance

• Large reservoir for reduced compressor cycling, better temperature control and energy savings

Model 7530 Air Cooled Water Chiller Operation

Designed for either closed or open loop water systems, this high efficiency air-cooled refrigeration system is simple to maintain. The unit continuously monitors functions and activates an alarm whenever operating conditions deviate beyond acceptable limits. Warm air is vented through the top of the unit by two 2 HP axial fans. There are optional centrifugal fans for ducted condenser air or for heat recovery applications. Total CFM from the fans is 15,000.

Energy Efficient

The chiller incorporates a copper-brazed stainless steel evaporator outside of the insulated thermal storage tank with true counter-flow of water and refrigerant that maximizes cooling performance. The Model 7529 uses 2 high-efficiency Scroll, R407C refrigerant compressors. The compressors are controlled by a thermostat and are designed to cycle off and on within a preset temperature differential. An oversized reservoir allows the compressors to cycle off and on a maximum of 8 starts per hour assuring extended compressor life. And with the pump running continuously, a standard temperature differential of ± 3° F (±1.7° C) promises constant, chilled water. The design ensures that the refrigeration power is directly proportional to the cooling load.

Includes:

Double electrical panel doors with Plexiglass window for improved weatherproofing and safety. Galvanized steel enclosure etched and finished with an epoxy coating. Crankcase heater installed for low ambient temperatures, built-in insulated energy storage tank, a plate heat exchanger external to the water reservoir, refrigerant HP and LP gauges, pump pressure gauge, adjustable LP and fan pressure switches, and a fail-safe flow switch. Consult TAFA for further details.

Options:

• Centrifugal fans for ducted condenser air or heat recovery applications

• Software and RS232 interface for modular connections

• Tank pressure gauge

• Sound attenuation package

• Automatic drain valve

• Outside (low ambient) package

• Automatic water make-up kits for closed-loop systems

• Easy-fill port with shut-off valve

• Sight glass for fill verification

• Alternate refrigerants

Praxair 3260/62 Refrigerated Heat Exchangers

"...3260 requires no plant water…"

"...ensuring longer gun hardware life."

Praxair Thermal Spray Products Model 3260 Series Refrigerated Heat Exchangers are designed for closed-loop thermal spray gun cooling applications. The 3260 uses a chemical refrigerant to cool the process water utilizing an air-cooled, hermetically sealed compressor.

The 3260 requires no plant water, making it ideal for installations where plant water or drains are not available, or where the plant water temperature is too hot to cool the process. The process cooling water loop in the 3260 is a closed system. This allows for use of distilled water, thus ensuring longer gun hardware life. Non-corrosive plumbing materials used in the 3260 guarantee minimal maintenance and long service life of internal components.

The 3260 easily connects to Praxair consoles via a single control cable. Gun water temperature is maintained by closed loop control of the refrigeration system. Desired to process water temperature is selected via a digital pad on the control panel. Monitoring gauges on the control panel show to-process water temperature, from process water temperature, and recirculating pump pressure. In addition to refrigerant safety indicators, the control panel features a process water flow meter, main power on-off switch, and an air purge switch for blowing process water from the gun and hoses when performing gun maintenance.

The 3260 is ideal for both plasma and HVOF thermal spray applications. The rugged, simple, and compact design makes it an affordable solution for your demanding gun cooling needs. Please contact our customer service representatives to find out more about the Model 3265 Refrigerated Heat Exchanger.

Model 3260 60 Hz: 9 ton capacity (10 Hp compressor) 50 Hz: special order Model 3262 60 Hz: 10.8 ton capacity (12 Hp compressor) 50 Hz: 9 ton capacity Model 3265 60 Hz: 13 ton capacity special order 50 Hz: 10.8 ton capacity